Your asphalt pavements can last for several years if they are well laid out and well maintained on a regular basis.  There is a lot that goes into asphalting and professional maintenance of asphalt Brisbane has today in order to ensure maximum durability. Without that, your surfaces will begin degrading sooner than is necessary and given the high cost of installing them in the first place, repaving is a large expense that you cannot afford to foot every few years. Here are some of the best practices that will help you ensure the maximum durability and longevity of your asphalt in Brisbane.

Doing Nothing is Extremely Costly

Doing nothing for your asphalt pavements can be extremely costly. Even where it has been laid well using the best techniques and workmanship, low-quality asphalt Brisbane traders offer will begin degrading almost immediately thanks to frequent use and effects such as the weather. Without adequate protection of the asphalt surfaces, it will be exposed to risks such as the UV rays, oxidation of the asphalt material, as well as damage due to flooding and water seeping into the surface. The combined effects of these factors will cause void and cracks on the surface of the asphalt and these will grow larger with time if you do not address them in time with some corrective measures.

Sweeping and Blowing the Asphalt Surface

Regular sweeping, as well as cleaning of your Brisbane asphalt surface, will, at first, keep it clean and nice-looking. When it is clean, you can also carry out a proper inspection of the pavement surface and detect many of the cracks and voids that are on the surface. It is these voids which generally lead to the oxidation and water damage of the asphalt.

Monitoring Vehicle Load

This is another important best practice when it comes to maintaining your Brisbane asphalt surfaces. There are certain large vehicles such as the garbage trucks that you need to watch out for as they put excessive pressure on the asphalt thus leading to the cracking of the surface. One way of limiting this damage due to the vehicle weight is placing the dumpsters close to the entrance of the property so that they don’t have to run over your asphalt. Also, in order to prevent the trucks from damaging your asphalt, you can use concrete next to the dumpsters so that they can bear much of this load.

Take Care of Drainage

Poor drainage is one of the main issue

asphalt Brisbane

asphalt Brisbane

s that generally leads to a quick degradation of your asphalt surfaces. If water sits in little pools on your asphalt for too long, it is going to lead to a quick wearing out of the surface. Look for a good quality of asphalt Brisbane has to offer so that the water on it can drain off relatively quickly.


Sealcoating is an important best practice when it comes to maintaining your asphalt surface. The good advantage with it is that it is also a very cost-effective way of keeping your asphalt in top shape. Through seal coating, you will be able to protect your asphalt surfaces from effects such as the UV rays, water damage and oxidation effects. It is also good for its aesthetic effect as it will create a rich black color on your asphalt.

Crack Filling and Pothole Repairs

Perhaps these are some of the maintenance techniques which we are most familiar with. Filling in the cracks will prevent water from seeping into the asphalt which generally worsens the situation.

When it comes to maintaining the surface of your asphalt, you will generally hover between temporary and permanent fixes as well as maintenance schedules that will enhance the durability of your surfaces. Check out Creggs Asphalt for more details.